LIFT UP SYSTEMS

Kinvaro F-20 Folding Flap Fitting

KINVARO f20

  • Holds flap securely in any position
  • Extremely smooth movement
  • Adjustable spring force
  • Integrated adjustable closing damper
  • Flap with 3-dimensional adjustment – height, side, angle:direct adjustment ±1.5 mm
  • 3-dimensional reveal height, side, depth adjustment: Direct adjustment
  • Opening limiter adjustable to 90°
  • Wide range of applications for many different flap materials
  • Fast, tool-free clip fitting of the front
  • Width: 400 – 1200 mm
  • Range of flaps: Height: 520 – 900 mm Weight 3.8 to 19.2 kg
  • Pre-assembled Euro screws and positioning pins for easy fixture of the fitting to the side wall

F 20 folding flap fitting

Cabinet height mm Type B Type C Type D
520 – 559 009.024.02878
560 – 599 006.024.02879 006.024.02880
600 – 649 006.024.02881 006.024.02882
650 – 699 006.024.02883 006.024.02884
700 – 749 006.024.02885 006.024.02886
750 – 900 006.024.02887 006.024.02888

Kinvaro S-35 Up and Over Flap Fitting

KINVARO s35

    • Securely holds flap in any position from 45° opening angle
    • Extremely smooth movement
    • Adjustable spring force
    • Integrated adjustable closing damper
    • Flap 3-dimensionally adjustable – height, side, angle: direct adjustment ±1.5 mm
    • Allows the use of cornices, pelmets and attached lights
    • Wide range of applications for many different flap materials
    • Fast, tool-free clip fitting of the front
    • Pre-assembled Euro screws and positioning pins for easy fixture of the fitting to the side wall
    • Extremely strong
    • Weight 1.5 to 17.5 kg
    • Range of flaps: Width: 450 – 1200 mm Height: 420 – 750 mm

S – 35 up and over flap fitting

Height mm Type A Type B Type C Type D Type E
420 – 750 006.024.02889 006.024.02890 006.024.02891 006.024.02892 006.024.02893

Kinvaro T-65 Lift Up Flap Fitting

KINVARO t65

    • Variable opening angle – holds flap securely at any angle between 45° and 100°
    • Extremely comfortable opening thanks to spring-supported opening mechanism
    • Adjustable spring force
    • Integrated adjustable closing damper
    • Adjustable flap height ±3.0 mm
    • No hinges fitted to the top panel
    • Allows additional cabinet installation above
    • Can be used for wooden flaps or aluminium frames with glass infill
    • Weight 0.7 to 7.4 kg
    • Range of flaps: Width: to 1200 mm
    • Height: 250 – 600 mm

T – 65 lift up flap fitting

Height mm Type A
250 – 600 006.024.03006

Kinvaro T-71 Lift Up Flap Fitting

KINVARO t65

    • Variable opening angle – holds flap securely at any angle between 45° and 100°
    • Extremely comfortable opening thanks to spring-supported opening mechanism
    • Adjustable spring force
    • Integrated adjustable closing damper
    • Flap 3-dimensionally adjustable – height, side, angle: direct adjustment ±1.5 mm
    • No hinges fitted to the top panel
    • Allows additional cabinet installation above
    • Can be used for wooden flaps or aluminium frames with glass infill
    • Fast, tool-free clip fitting of the front
    • Weight 1.4to 8.5kg
    • Range of flaps: Width: to 1200 mm
    • Height: 300 – 600 mm

T – 71 lift up flap fitting

Height mm Type A
300 – 600 006.024.02927

Kinvaro T-76 Lift Up Flap Fitting

KINVARO t65

    • Variable opening angle – holds flap securely at any angle between 45° and 100°
    • Extremely comfortable opening thanks to spring-supported opening mechanism
    • Adjustable spring force
    • Integrated adjustable closing damper
    • Flap 3-dimensionally adjustable – height, side, angle: direct adjustment ±1.5 mm
    • No hinges fitted to the top panel
    • Allows additional cabinet installation above
    • Can be used for wooden flaps or aluminium frames with glass infill
    • Fast, tool-free clip fitting of the front
    • Weight 5.2to 11.0kg
    • Range of flaps: Width: to 1200 mm
    • Height: 400 – 600 mm

T – 76 lift up flap fitting

Height mm Type A
400 – 600 006.024.02926

Kinvaro L-80 parallel lift flap fitting

KINVARO l80

    • Holds flap securely in any position
    • Extremely smooth movement
    • Adjustable spring force
    • Integrated adjustable closing damper
    • Flap 3-dimensionally adjustable – height, side, angle: direct adjustment ±1.5 mm
    • Allows the use of cornices, pelmets and attached lights
    • Wide range of applications for many different flap materials
    • Fast, tool-free clip fitting of the front
    • Pre-assembled Euro screws and positioning pins for easy fixture of the fitting to the side wall
    • Extremely strong Weight 1.9 to 14.6 kg
    • Range of flaps: Width: 450 – 1200 mm
    • Height: 350 – 600 mm

L – 80 parallel lift flap fitting

Height mm Type A Type B Type C
430 – 600 006.024.02894 006.024.02895 006.024.02896

Kinvaro T-105 Lift Up Flap Fitting

KINVARO l80

    • Variable opening angle, holds flaps securely from 45˚ to 105
    • Spring-supported opening function
    • Convenient access, flap lifts clear of the work area
    • Suitable for wooden doors and aluminium frames with glass infill
    • Allows additional cabinet installation above
    • Maintenance-free, no readjustment required
    • High-quality zinc diecasting, nickel-plated
    • Range of flaps: Width: up to 1200 mm Weight: 250 – 500 mm
    • Note: • Tiomos 120° hinages with spring, without damper, and Tiomos mounting plates for top panel need to be ordered separately

T – 105 lift up flap fitting

Height mm Max Mini
Left 006.024.02951 006.024.02950
Right 006.024.02953 006.024.02952

Kinvaro D-M Stay With Pull cable

KINVARO l80

    • Damped opening
    • Opening angle adjustable via length of pull cable
    • Can be used with shallow cabinets from 82 mm depth
    • Flap height 200 mm – 480 mm
    • Can be used on left/right
    • Easy to install horizontally or vertically
    • Color – coordinated with Tiomos flap hinge
    • Note: Please order Tiomos flap hinges separately
Height mm White
40 N 005.019.02485
60 N 006.019.02578

Duo

duo-main

  • Duo is a flap support with an opening angle up to 110°.The holding force can be set steplessly. If the front panel and the fitting are mounted to open downwards, the front can also function as a temporary work surface or bar counter.
  • The fact that Duo is identical for left and right mounting simplifies logistics and assembly.
  • ClickFixx is standard for quick and easy assembly and user-friendliness.Holding force can be set steplessly Mount for either flap support or bar counter function Choice of door ( on request ) Wooden door
Product Name Shutter Type Article Code
lll>A1 Normal Door 009.024.02173

Duo Forte

duo-forte-main

  • Forte is a flap support with an opening angle up to 110°.The holding force can be set steplessly. If the front panel and the fitting are mounted to open downwards, the front can also function as a temporary work surface or bar counter.
  • The fact that Forte is identical for left and right mounting simplifies logistics and assembly.
  • ClickFixx is standard for quick and easy assembly and user-friendliness.
Product Name Shutter Type Article Code
lll>B1 Normal Door 20 mm 009.024.02175

Maxi

maxi-main

  • Maxi is a high-spec lift system capable of handling front panels up to 27.3 kg. With multiposition stop and SoftStopp Plus all movement sequences are impressively smooth and easy.
  • Maxi is extraordinarily versatile – even for handle-less fronts. Assembly couldn’t be simpler – with the help of ClickFixx the fitting is simply clipped in place – no tools required.
Product Name Normal Door 20 mm
C1 – Maxi 009.024.02177 009.024.02176
C2 – Maxi Soft Close 009.024.02179 009.024.02178

FREEfold

free-fold-main

  • The ideal solution for wall units in low-ceilinged rooms. Freefold, is simply smart – it folds up the split front panel on the way up, so as to take up a minimum of space.
  • The integrated multi position stop system holds the front securely in any intermediate position.
  • Other attractive features are the minimal installation depth, simple adjustment and the fact that Freefold fittings can be used for unit heights as high as 90 cm. Flexible Freefold fittings can handle both symmetrical and asymmetrical front panel splits. Kitchen designers and planners set a high value on all these features.

How to choose the right item number?

Cabinet height mm Weight capcity kgs. Normal Door Set Code
480-530 5.2 – 11.1 kg 009.024.02132
7.8 – 16.3 kg 009.024.02133
520-590 4.8 – 10.3 kg 009.024.02134
7.2 – 15.5 kg 009.024.02135
11.8 – 24.5 kg 009.024.02136
580-680 4.3 – 9.2 kg 009.024.02137
6.5 – 13.5 kg 009.024.02138
10.6 – 22.0 kg 009.024.02139
650-730 3.9 – 8.9 kg 009.024.02140
5.8 – 12.2 kg 009.024.02141
9.5 – 19.7 kg 009.024.02142
Cabinet height mm Weight capcity kgs. Normal Door Set Code
710-790 5.3 – 11.1 kg 009.024.02143
8.7 – 18.0 kg 009.024.02144
770-840 4.9 – 10.3 kg 009.024.02145
8.0 – 16.7 kg 009.024.02146
840-910 4.5 – 9.5 kg 009.024.02147
7.3 – 15.3 kg 009.024.02148
910-970 4.2 – 8.7 kg 009.024.02149
6.8 – 14.2 kg 009.024.02150
960-1010 6.5 – 13.5 kg 009.024.02151
1000-1040 6.2 – 12.9 kg 009.024.02152

Freeslide

free-slide-main

  • Form follows function – and beautifully. FREEslide lifts the front panel vertically, opening up totally new design potential for kitchen planning. FREEslide is the perfect choice when units are stacked on top of each other or for wall units with top lighting or cornices. The integrated Multi-Position STOPP guarantees that the front will STOPP immediately and securely in any position. This means there’s a lot of user convenience tucked away behind a visually smooth run of fronts, not only in the kitchen, but anywhere in the house.
Cabinet Height (mm) Door Width (kgs) Set Code
320 – 360 4.8 – 9.8 009.024.02158
345 -420 4.1 – 8.4 009.024.02159
7.4 – 14.7 009.024.02160
11.0 – 21.6 009.024.02161
380 -500 3.4 – 7.1 009.024.02162
6.3 – 12.4 009.024.02163
430 -600 2.8 – 5.9 009.024.02164
5.2 – 10.4 009.024.02165
7.7 – 15.2 009.024.02166

Free Swing

free-swing-main

  • The right choice for comfortable and practical 21st century living FREEswing lifts medium and large fronts elegantly and effortlessly. Whatever the size of the front, FREEswing has been engineered to maximize the space available for storage and to give free access to all the contents. FREEswing lifters naturally also feature Multi-Position STOPP. With their compact design and strong performance, FREEswing lifters are perfect for a range of applications in kitchens, bathrooms and living space. eTouch delivers easy electric opening and closing.
Height mm Weight capcity kgs. Set Code
370-500 3.0 – 7.0 kg 009.024.02167
4.5 – 10.6 kg 009.024.02168
500-670 4.5 – 10.6 kg 009.024.02169
7.0 – 16.7 kg 009.024.02170
670-800 5.3 – 11.8 kg 009.024.02171
8.0 – 11.8 kg 009.024.02172

Free Flap

free-flap-main

  • Practical, balanced and compact. the FREEflap mini/forte is the “little toughie” in the lifter family. With an installation depth of only 118 mm, the FREEflap mini/forte can lift fronts weighing up to 27 kg. The integrated Multi-Position STOPP guarantees that the front will stop securely in any position. And we’re delighted with the German Design Award 2015!.
  • MINIMAL ASSEMBLY EFFORT. Integrated guide pins for fast, precision positioning. Premounted euroscrews save time and effort. The euroscrews also grip directly onto the base plate, which guarantees high stability for the movement system. Like all the other members of Kessebohmer’s lifter family, the fitting is clicklocked to the front in a ClickFixx system.
Cabinet Height mm Weight Capacity kgs. Type Set Code
->200 – –< 420 See chart FREE flap mini type ‘A’ Grey 009.024.00851
->200 – –< 420 See chart FREE flap mini type ‘B’ Grey 009.024.00852
->200 – –< 420 See chart FREE flap mini type ‘C’ Grey 009.024.00853
->350 – –< 650 See chart FREE flap forte type ‘D’ Grey 009.024.00847
->350 – –< 650 See chart FREE flap forte type ‘E’ Grey 009.024.00848
->350 – –< 650 See chart FREE flap forte type ‘F’ Grey 009.024.00849
->350 – –< 650 See chart FREE flap forte type ‘G’ Grey 009.024.00850

Freelift eTouch

free-lift-etouch-1
FEATURES & BENEFITS:

  • Opens the front automatically with just a light tap.
  • Just ONE drive for FREEfold, swing & slide
  • Can be retrofitted without restrictions in line with the familiar typologies
  • Free-running with the familiar FREElift smooth operation
  • No additional treatment of fronts necessary
  • Programmable additional functions
  • Integrated obstacle recognition

Catalouge cover & Index page
Catalouge cover & Index page

Miniwinch

Catalouge cover & Index page

  • Mechanism for drop down flaps, MINIWINCH allows very good access to the internal cabinet..
  • Mechanisms are available for flaps of heights from 200 to 480 mm, and up to 15 kg*, It is possible to adjust the opening and closing strength, allowing the mechanism to be used with door of different weights.
  • The mechanism can be used both in horizontal and in vertical position.The mechanism are Left / Right compatible. Even narrow cabinets can be fitted with Miniwinch.
  • Available colors : White, Grey, Smoke.
  • On request : Black, Brown and painted covers possible.
Product Name Miniwinch 60N Miniwinch 100N Miniwinch 140N Miniwinch 160N Miniwinch 200N
Miniwinch
005.019.00814 005.019.00810 005.019.00811 005.019.00812 005.019.00813
Product Name White Grey Smoke
Cover Cap
005.012.00805 009.012.00803 009.012.00804

Mover

Catalouge cover & Index page
The mechanisms are composed by:

  • Aluminium profile in 6060T5 alloy, anodized in silver ARC10
  • Components for the transmission and regulation (cables in VECTRAN fiber; components in ZAMAC 13 alloy, components in pressed plastic)
  • Compensation spring

The doors have to satisfy to the following requirement:

  • Maximum door weight: see table here below
  • Width of doors: 900-1200-1800-2400mm
  • Door height: 480-600mm
  • Materials:
    1. wood or derived material
    2. glass with aluminium frame

System cleaning:

  • The system parts can be cleaned with a soft cloth using water and soap. Do not use any solvents or abrasive products.

Disposal:

  • The products and it components must not be disposed of in the environment; for disposal, please use public disposal systems.

Catalouge cover & Index page

Description Capacity Size Code
Mover System for Doors 18mm 5-7 kgs H-600mm, W-900mm 002.024.00877
Mover System for Doors 18mm 7-9 kgs H-600mm, W-1200mm 002.024.00874
Mover System for Doors 18mm 11-13 kgs H-600mm, W-1800mm 002.024.00875
Mover System for Doors 20mm 6-8 kgs H-600mm, W-900mm 002.024.00878
Mover System for Doors 20mm 10-12 kgs H-600mm, W-1200mm 002.024.00873
Mover System for Doors 20mm 15-17 kgs H-600mm, W-1800mm 002.024.00876

Up and Above

Catalouge cover & Index page

  • 3/8” slide profile, mounts into routed channel in rear side of door.
  • Unhanded design.
  • Triple precision steel ball bearing movement.
  • Metal Ball Bearing Retainer for durability and quiet operation.
  • Bright electro-zinc plated with lacquered finish for better corrosion resistance. Black finish available.
  • Rugged 3/4’ Offset Hinge with permanently staked pin. 1” Offset Hinge available. Other hinge configurations available.
  • Long life, one piece roller to protect cabinet top.
  • Maximum door weight is 20 pounds per pair.
  • Maximum door size is 48” wide and 24” high.
Up and above application Specification Item No.
Drawer Slide BEZ 12″ (300 mm) 010.024.00892
Drawer Slide BEZ 14″ (350 mm) 010.024.00893
Drawer Slide BEZ 16″ (400 mm) 010.024.00894

Up and Under

Catalouge cover & Index page

  • Thin 3/8” slide profile mounts inside cabinet.
  • Rugged hinge for 3/4” door thickness with permanently staked pin.
  • Hinge has built in stop at 90° rotation to help prevent door face from scraping underside of cabinet top.
  • Mounting brackets welded to slide at factory.
  • Triple precision steel ball bearing movement.
  • Metal Ball Bearing Retainer for durability and quiet operation.
  • Electro-plated bright zinc chromate with clear lacquered topcoat for better corrosion resistance and appearance. Black zinc chromate finish available.
Up and under application Specification Item No.
Drawer Slide PEZ 12″ (300 mm) 010.024.00895
Drawer Slide PEZ 14″ (350 mm) 010.024.00896
Drawer Slide PEZ 16″ (400 mm) 010.024.00897