WARDROBE SYSTEMS

• High-quality folding door fitting system with large ballbearing rollers and therefore particularly easy running.
• For extremely high weights per door pair up to 400 N (roller elements with four bore cups 700 N).
• Height adjustment of the roller elements for subsequent alignment of the fronts up to ±1.5 mm.
• Suitable for door leaf widths up to 500 mm and door leaf thicknesses up to 27 mm.
• Any number of door pairs can be individually coupled to form door packages and be freely moved.
• Smooth running automatic folding of the coupled door pairs by specially shaped drawing key (optional).
• Due to the middle hinge with loose steel pin, door leaves can be individually hung in the runner rail and subsequently be coupled to form door pairs (one-man fitting).

• High-quality folding door fitting system for clip-fitting the roller elements in the runner rail without tools.
• For high weight per door pair up to 350 N with tandem roller.
• Height adjustment of the roller elements for subsequent alignment of the doors up to ± 2 mm.
• Suitable for door leaf widths up to 450 mm and door leaf thicknesses up to 27 mm.
• Due to the middle hinge with loose steel pin, door leaves can be individually hung in the runner rail and subsequently be coupled to form door pairs (one-man fitting).

• High-quality folding door fitting system for clip-fitting the roller elements in the runner rail without tools.
• By fixing the door pairs to the carcass sides, high door pair weights up to 350 N can be reliably realized, especially if a carrying runner rail is used for stabilization.
• A bottom guide rail is only needed for high doors.
• Height adjustment of the roller elements for subsequent alignment of the doors up to ± 2 mm.
• Suitable for door leaf widths up to 500 mm and door leaf thicknesses up to 27 mm.
• Due to the middle hinge with loose steel pin, door leaves can be individually hung in the runner rail and subsequently be coupled to form door pairs (one-man fitting).

Dimensions given are not binding – Technical modifications rights reserved.

• Folding door fitting system based on only a few versatile parts.
• The carrying effect of the runner rail stabilizes the individual fixing of the folding door to the furniture carcass.
• The runner rails ensures a carrying power of 200 N of the fitting system, independently to the fixing.
• A bottom guide rail is only needed for high doors.
• Suitable for door leaf widths up to 500 mm and door leaf thicknesses up to 20 mm.
• Due to the middle hinge with loose steel pin, door leaves can be individually hung in the runner rail and subsequently be coupled to form door pairs (one-man fitting).

• Guide rails
  Identical rail in top and bottom shelf. Groove depth only 6 mm, rails can also be used in 19 mm thick panels. Rail stopper in preparation.
• Spring-loaded guide ledges
  Drilling pattern of common concealed hinges. Guide ledge with pre-engagement function and release mechanism facilitates turn-in fitting. Very easy to disengage
  for dismantling. The resilient path provides permanent protection against disengagement.
• Roller gliders
  Drilling pattern of common concealed hinges. Height adjustment +/- 1,5 mm. Tool less operation using the obvious knurled nut. The special roller cage prevents
  disengagement throughout the entire height of the adjustment path.

	Product Description	Article Code
	1 Complete set for one door – 20 kg	015.042.02310
	2 Spring-loaded guide for screwing
	2 Roller glider for screwing

	Guide Rail
No Holes
Length (mm)	Design	PU	Article Code
2500	Plastic, Brown	1	014.042.01285

Dimensions given are not binding – Technical modifications rights reserved

	Product Description	Article Code
	Handle options:
	Fitting inner glass sliding door	015.041.01246
	Fitting outer glass sliding door	015.041.01247
	Aluminium Handle Rosette for Glass sliding	015.041.01248

Note: The manufacturer reserves the right to make technical changes without prior notice

• Sliding door fitting system, running at the bottom.
• Door thickness min. 15mm.
• Roller elements with steel ball bearing, additional carrying bolts and a roller with a diameter 35mm
• Excellent running properties, suited for extremely high door weights up to 450n.
• Due to single-track rail system, which can be combined to be a double track, there is no prescribed maximum door thickness.

• Two And Three Doors Solution
• Program for sliding doors assembled externally to the structure.
• Possibility to use traditional fixed stoppers or soft-closing dampers.
• Doors can be made in wood or with aluminium frame.
• Assembling is easy and immediate.
• Maximum door weight 50 kg. Minimum door width 600 mm

Program for sliding doors with maximum weight 50 kg suitable for both wooden or aluminium framed doors. Available with soft-closing dampers or traditional stoppers.

• Sliding door fitting with large rollers (Ø 35 mm) and therefore very good running properties.
• Delrin rollers with steel ball bearing (for door weights up to 500 N).
• For door thicknesses up to 20 mm (rear door).
• Wide variety of bottom guideway solutions

System Overview

• Sliding system for inner doors
• Load capacity 40kg each door
• The small size built-in rail can be used with standard panels of 18 mm minimum thickness
• Rollers are equipped with anti-derailment springs and with a locking/release device of the door.
• Vertical adjustment 6 mm
• Soft-closing integrated

Kit For One Door with Soft Closing Device

• Sliding door fitting system, running at the bottom.
• Door thickness min. 16 mm.
• Roller elements with steel ball bearing, additional carrying bolts and a roller with very large diameter (40mm).
• Excellent running properties, suited for extremely high door weights up to 550 N.
• Due to single-track rail system, which can be combined to a double track, there is no prescribed maximum door thickness.

• Sliding door fitting system, running at the bottom.
• Door thickness min. 16 mm.
• Roller elements with steel ball bearing, additional carrying bolts and a roller with very large diameter (40mm).
• Excellent running properties, suited for extremely high door weights up to 1200 N.
• Due to single-track rail system, which can be combined to a double track, there is no prescribed maximum door thickness.

• High-quality, low-noise sliding-door fitting for carcasses without blind.
• Bottom runner rails allow an ideal incorporation of the doors, because the plinth is used as a solid supporting element.
• Runner rail tracks one on top of the other reduce the risk of warping of the front door.
• Quality ball bearing rollers Ø 45 mm for extremely smooth running.
• Sturdy aluminium runner rail, silver anodized on request.
• 700 N carrying capacity.
• Two basic versions for door thickness from 16 to 21 mm and from 21 to 27 mm.

Composition of mechanisms:

• ARC10 silver anodized 6060 T5 alloy aluminium profiles.
• Sliding wheels made with high velocity bearings covered in plastic material.
• Rails for the sliding out of plastic doors for excellent sound-proofing.
• Supporting top car in pressed aluminium alloy brackets in galvanized sheet.
• Sliding and regulating parts in primary zamak 13.

Doors features:

• Wood or derivatives.
• Glass with aluminium frame (consult the manufacturer to check for feasibility).
  Dimensions: Width:
  min. 800
  max. 2000
  Thickness:
  min. 18
  max. 45 (including handle)
• Cleaning of mechanisms: The parts cleaning shall be made with water and soap on a soft cloth. Avoid products containing solvents and abrasive products.
• Disposal: The product or its parts shall be disposed off responsibly, by sending them to public dumps.

Composition of mechanisms:

• Aluminium profiles: 6060T5 alloy, silver anodised.
• Rollers: high-velocity bearings.
• Components: in primary zamak 13, coated steel, plastic.

Door features

• Maximum weight for each door 70 kg (evenly distributed).
• Width: – minimum 900 mm; – maximum 1700 mm.
• Height: – maximum 2700 mm.
• Thickness: – minimum 18 mm; – maximum with handle 45 mm.
• Height from the ground:- 33 mm.

Material

• 1. wood or derived material;
  2. glass with metal frame
• Adjustment: – vertical ±5.0 mm;- horizontal ±3.5 mm.
• Front side adjustment:-
• upper ± 3.0 mm; and
• lower ± 3.0 mm.
• Assisted opening and closing.

Types of opening

• The doors are opened by means of handles fitted at the center of the unit.

Note: Any other sizes can be provided on request.

Doors width up to 1750 mm Door thickness up to 45 mm 2 doors wardrobe up to 85 kg for each doors Soft closing and soft opening Integrated No grooving required in the doors Easy to assemble, no need install sliding Customizable

** Thickness includes handle
* For two-panel

Mechanism elements

• ARC10 silver anodized 6060T5 alloy aluminium profiles.
• Nylon-coated rollers with high velocity bearings.
• Guide rails in thermoplastic for excellent soundproofing.
• Top support carriage in pressed aluminium
• Brackets in galvanised steel.
• Sliders and adjustment parts in primary zamak 15.

Doors features:

• Wood or derivatives.
• Glass with aluminium frame.
  Dimensions: Maximum weight for each door = 100
  Kg(Evenly distributed).
  Width: minimum 800 mm, maximum 2000 mm
  Height: maximum 3000 mm.
  Thickness: minimum 18 mm, maximum 45 mm (including handle).
  Door vertical adjustment ± 5 mm.
  Door horizontal adjustment ± 3.5 mm.
• Material:
  1. wood or derivatives.
  2. glass with an aluminium frame.
• Cleaning of mechanisms: Cleaning the components must be executed using soap and water with a soft cloth. Avoid using products containing solvents and abrasive products.
• Disposal: The products and their components must not be disposed off in the environment; for disposal, please use public disposal systems.